Banner Making Accessories & Other Products

These handy banner making accessories and additional products are the perfect complement for every banner studio. You buy wholesale and save.

New PowerPunch PPUNCH516
New PowerPunch PPUNCH516
New PowerPunch
PowerPunch is designed for heavy duty use. Replacement punches are available to extend life of tool.
REPLACEMENT PUNCH - PPR516
REPLACEMENT PUNCH - PPR516
 
 

Tab Maker Introduces Hand-Held Hole Punch

E. L. Hatton Sales Co., maker of Banner Ups PowerTabs® Adhesive Grommet Tabs, announces the introduction of the new PowerPunchTM a heavy duty hand-held punch capable of easily cutting holes in thick banner material.

Hand-Held Hole Punch
Hand-Held Hole Punch
 
PowerPunch is used to punch holes through PowerTape, PowerTabs and banner substrates.
"Customers often ask us for recommendations on how to punch holes through the banner corners. Now we have a great solution," explained company president Rick Hatton, "and the PowerPunch will have lots of uses around the shop. It's powerful and durable, but unlike a benchtop grommet press, it is portable and much less expensive."
PowerPunch cuts cleanly through Banner Ups® PowerTabs®, PowerTape®, and heavy duty banner substrates. This innovative tool has a replaceable punch that ensures long term durability far greater than paper punches or single-hole dies, which become dull quickly. Due to its relatively small size and light weight PowerPunch is completely portable and significantly lower in cost than benchtop grommet presses. The tool will cut substrates up to 1/8" thick and is properly sized to make center-hole cuts in PowerTabs.

POLETAPE ADHESIVE for Pole Pocket Banners and splicing media

POLETAPE 1" POLE135
 
POLETAPE 1" POLE135
POLETAPE 1/2" POLE0520
POLETAPE 1/2" POLE0520
POLE0520 1/2" (left) POLE1351" (right)
POLE0520 1/2" (left) POLE1351" (right)
 
This super strong adhesive goes on like tape but sticks like hot melt glue. Use PoleTape instead of sewing to create dowel pockets for pole banners, or for joining banner media. It may also be used for permanent mounting on wood, rigid plastics, and metal. Available in 1" wide x 35 mil thick, 200ft roll (POLE135) and 1/2" wide x 20 mil thick, 200ft roll (POLE0520), for lighter duty.

POLYTABS

Polytabs
 
Polytabs
POLYTABS BAN-016AS
Polytabs
 
 
Packaged in convenient dispenser rolls of 2000 tabs. Continuous tab roll is perforated every four tabs.
PolyTabs are much easier to apply than grommets or eyelets, and because they require no special equipment, they may be installed at a fraction of the time and labor cost of grommets. While grommets can easily tear out of banner corners due to wind stress or simply the weight of a display banner, Polytabs spread the load over a much larger area and thus give even the lightest weight media such great strength.

CUSTOM SHAPES

Don't see the product you need?
Describe your application and we will design and manufacture a Banner Ups tab to meet your exact specifications. We love to solve your fastener challenges!
  Upcoming Events