THE QUICK, INEXPENSIVE ALTERNATIVE TO GROMMETS
POWERTAPE® IS EASY TO USE:
Apply PowerTabs®.
Apply PoweTape® along top and
bottom edge on back of banner.
Use cutter to cut PowerTape®.
Punch hole using the PowerPunch.

REINFORCE BANNER EDGES WITHOUT FOLDING OR SEWING A HEM.
• Use PowerTape® to create a super strong banner of any length.
• Single-sided super strong film. No need to fold hem.
• Duplicates the strength of folded hem and double-sided banner tape, but eliminates the hassle!
• Eliminate the risk of damage to image by post-print sewing.
• Create a perfectly sharp digital banner. No rippled hem.
Fabricate a mighty banner in only 3 minutes!

HERE'S WHAT OUR CUSTOMERS SAY ABOUT POWERTAPE
"Your product does everything you advertise it will. I had a large, very expensive banner and the metal grommets ripped out. I was seeking a good solution for repairing it. The adhesive backed grommets [PowerTabs] and repair tape [PowerTape] did a fabulous job! We live in an area that is practically a wind tunnel [with] the Santa Ana or ‘devil winds’ - very hot dry winds with gusts up to 70 miles per hour. Your product held up very well and I’m sure my banner will give me several more years of service. Would not hesitate to reorder!" - Melody B. Norco, California

POWERTAPE® TIPS:
• Recommended for outdoor banners more than 8 feet in length.
• When used with PowerTabs® apply tab first. PowerTabs® will not stick over PowerTape®
because the tape has a silicone release coating.
• Apply light tension to banner for easy application.
• Position 1/8”-1/4” from top and bottom edge to allow for some tape wander.
• PowerTape® may be used along sides of vertical banners to reduce edge curl.

PRODUCT DESCRIPTION
PTAPE PowerTape
Packaging: 36 yards/roll: 5 rolls/case
Size: 1.5" wide x 36 yard length
Features: Use PowerTape with PowerTabs to create ultra strong banners.

FREQUENTLY ASKED POWERTAPE® QUESTIONS (Click link for the answer)
Q - What is the difference between PowerTape® and typical double sided banner hemming tape?
Q - How do I use PowerTape®?
Q - Do I put the PowerTape® on the banner first, or the PowerTabs®?
Q - Should I use PowerTape® on all four sides?
Q - Do I have to run PowerTape® all the way along the edge or can I just run it a foot or two from the corner and still get the same strength?
Q - Should I use PowerTape® for outdoor banners only, or for indoor as well?
Q - Can I use PowerTape® by itself, without PowerTabs®?
Q - Can I use PowerTape® with grommets without PowerTabs®?