Thank you for your interest in Banner Ups products!

Banner Ups, PowerTabs and PowerTape can offer your shop a simple, inexpensive alternative to grommets in fabricating super-strong banners of any length, instantly. Following is a brief description of all our Banner Ups products for your reference.

BANNER UPS - Regular, Mini, Clear Mini w/Backtab

BAN001

Forget grommets! Original Banner Ups are still one of our biggest sellers. Made with a foam adhesive, Banner Ups aggressively bond to virtually all banner materials as well as Coroplast, Foamcore, and paper. Use Large Banner Ups (BAN001) for the toughest outdoor banner applications and Mini Banner Ups (BAN002) for indoor or light duty outdoor applications.

BAN002

BAN003

Banner Ups unique shape allows them to be applied at different corner angles as well as along the top and sides of banners. For light duty use, just attach rope to the folded neck loop. For tougher jobs, run the rope through the tab center hole. Clear Mini Banner Ups w/Backtab (BAN003) are composed of a clear plastic film with an adhesive tab on the backside which permits adhesion directly to a wall or window surface. Both the white and clear mini Banner Ups are designed for indoor, short term, or light duty outdoor applications.

POWERTABS - White, White Mini, Crystal Clear, Crystal Clear Mini

BAN011

BAN012

New generation PowerTabs are made of high strength composite film, which is thinner than but just as strong as original Banner Ups. Their corner-friendly shape and thin profile help them blend inconspicuously into the banner surface. They are available in regular white (BAN 011) for outdoor use, and mini white (BAN 012) for indoor or light duty outdoor use. Run rope through PowerTab end loop for indoor applications, or through the pre-punched tab center hole for outdoor banners.

BAN014

BAN013

Crystal Clear PowerTabs (BAN 014) are perfectly transparent and designed for inkjet, digital, and other full color banners. They are virtually invisible after installation. For tough outdoor applications, use PowerTabs together with PowerTape hem reinforcing tape for maximum outdoor strength. Use Crystal Clear Mini PowerTabs (BAN 013) for indoor banners.

New!  EDGETABS BAN016 New Clear EdgeTabs (BAN 016) square shape makes them the ideal choice for banner edges when additional fastening points are desired. Measuring 1 1/2" square they may also be used on banner corners as a lower cost alternative to large PowerTabs for lighter weight applications. For a low cost hole reinforcement for banner stand graphics, just cut the tab in half and place on the back of banner corners, punch center hole, then place banner stand posts through the hole.

New!  BULKTABS

BAN043

BAN043

New BulkTabs (BAN 043) are designed to get massive strength out of extremely light weight materials. Due to their large size, BulkTabs can get tens or even hundreds of pounds of resistance out of the lightest materials. A rigid dowel (not included with tab) is inserted in the tab neck for reinforcement.

New!  PROTABS

BAN041

New ProTabs (BAN 041) are simple tabs designed for simple jobs. Use ProTabs to hang rigid board or as a low cost alternative to grommets on flexible materials, or even as grommet hole reinforcement.

INTRODUCTORY PRICE - TAKE 30% OFF
LISTED PRICES ON THIS ITEM!

POWERTAPE HEM REINFORCING TAPE

PTAPE8615

Forget about the hassle of folding over double-sided banner tape to make a banner hem! Made of heavy-duty film, PowerTape (PTAPE8615) takes the place of hemming and grommeting. Simply apply tape over PowerTabs along the top and bottom edges on the back of the banner. After applying the PowerTape, punch holes through the tape, tab center holes, and banner media, then run rope through the hole. In a few minutes, you can create a strong banner of any length without the time and struggle of grommeting, or the risk of damage to the image that post print sewing can cause. PowerTape works best when used in conjunction with PowerTabs.

New!  POLETAPE ADHESIVE for Pole Pocket Banners and splicing media

This super strong adhesive goes on like tape but sticks like hot melt glue. Use PoleTape instead of sewing to create dowel pockets for pole banners, or for joining banner media. It may also be used for permanent mounting on wood, rigid plastics, and metal. Available in 1" wide x 35 mil thick (POLE135) and 1/2" wide x 20 mil thick (POLE0520), for lighter duty.

Also, please note our competitive pricing on other banner fabrication supplies: Hook and Loop fastener tape with pressure-sensitive adhesive and Bulk Banner Twine.

BUILD YOUR BANNER BUSINESS
WITH BANNER UPS!